It looks like a simple dough. You can roll it in your hands, press it into the crevices and watch it harden over time. But the chemistry behind it is right.
Traditional putty is a mixture of whiting and boiled linseed oil. Whiting is just finely ground calcium carbonate. When mixed with oil, it forms a moldable paste. It’s not just putty. It’s a sealant.
How glazing putty works
The classic recipe is uncomplicated but strict. You need 85-90 percent whiting. Then add 10-15 percent linseed oil. If the ratio is wrong, the putty will fail. It should move freely in your hands without leaking oil. This means that the balance is right. If oil leaks, the texture is damaged. If it is too dry, it will crack.
This mixture fulfills one main function very well. It attaches the glass sheets to the window frames. It also stops gaps in woodwork. Also fill the nail holes. It sticks to surfaces. It forms a barrier against air and water.
Why ingredients matter
Why mix calcium carbonate with oil? Calcium carbonate is cheap. There is plenty of it. It provides mass. Linseed oil acts as a binder. It dries and forms a tough, flexible film. Together, they create a material that stays flexible long enough to work and then hardens to lock everything in place.
Some versions use white lead. This is old stuff. White lead putty mixes 10 percent white lead with whiting. They reduce whiting to make room. This changes the texture. It could dry faster. Could be more durable. But it is toxic. Modern builders avoid it.
Synthetic options
You can hardly find traditional putty in new buildings. Synthetic glazing compounds have gained the upper hand. They are easier to use. They last longer. They don’t shrink as much. They are everywhere now. Putty is mainly used for restoration work or old houses.
Other things called putty
The word “putty” has spread. It’s not just about the windows.
Iron putty is available. It is iron oxide mixed with linseed oil. It is used to sealant joints in metalwork. Another option is red-lead putty. It mixes red and white lead with linseed oil. Used for heavy-duty sealanting.
Some plastics are also called putty. They are doughy. They behave in the same way as an oil-based mixture. But they are synthetic polymers.
Putty powder is different. It is tin oxide. Used for polishing. Glass. Granite. Metal. It’s abrasive. It is not a sealant. It is a finishing agent.
The Bottom Line
Putty is easy. It’s just powder and oil. But it’s important to get it right. A bad mixture will leaks. A good mixture will last for decades. You can see it in old houses. The glass stays in place. The wood stays dry. That’s the magic.
It’s a material that doesn’t scream. There is no flashy tech. It just works. And sometimes the simplest solutions are the ones that outlast everything else.